Existing buildings
An option for retrofits where a conventional outdoor unit is difficult or unsuitable to install.
Midea H-PACK – Indoor heat pump for professional installers
New for professional partners
Midea H-PACK – Indoor air-to-water heat pump
A compact air-to-water heat pump for renovation projects and existing buildings, without a conventional outdoor unit. Project-specific air routing can be planned through the roof or facade.
Indoor installation
No conventional outdoor unit required.
R290
Natural refrigerant used in modern heat pump systems.
Existing buildings and renovation
Particularly relevant where outdoor installation space is restricted.
Flexible air routing
Different roof and facade duct configurations are possible.
For planning and installation
An additional option for heat pump projects in existing buildings
Midea H-PACK adds an indoor-installed air-to-water heat pump to the range. It offers professional installers an alternative for projects where outdoor unit placement, limited space or the building layout impose special requirements. The final installation must be assessed for the specific site.
Integration with existing heating installations
Depending on the project design, H-PACK can be incorporated into suitable heating systems and different hydraulic concepts.
PV and smart energy
With appropriate system planning, the heat pump may be connected to PV generation and wider energy management concepts.
H-PACK accessories
Plan air routing for the installation location
Different Burgerhout configurations are available for the indoor H-PACK unit. Depending on the building, intake and exhaust air can be routed via the roof, facade or a combined arrangement. The design must suit the specific construction and installation conditions.
Horizontal roof penetration
Accessory configuration for horizontal roof air routing for the H-PACK system.
View configurationVertical roof penetration
Coordinated components for a vertical H-PACK air duct route through the roof.
View configurationWall routing
Burgerhout configuration for routing H-PACK intake and exhaust air through a facade, for projects with a suitable wall penetration.
View configurationCombined roof and wall routing
Accessory solution for installations where roof and wall penetrations are combined.
View configurationInstallation accessories
Additional components for planning, air routing and installing the Midea H-PACK system.
Explore accessories
Planning for professional installers
Treat H-PACK as a complete system
For an indoor heat pump, the unit is only one part of the design. Air intake and exhaust ducting, hydraulic integration, available installation space and the building conditions should be considered together from the beginning.
- âś“ Check installation location and available indoor space
- âś“ Design air intake and exhaust routing via the roof or facade
- âś“ Define hydraulic integration
- âś“ Consider the existing heating equipment
- âś“ Assess PV and smart-energy integration for the specific project
01 · Assess building conditions
↓
02 · Determine the H-PACK location
↓
03 · Configure air routing
↓
04 · Integrate hydraulics and controls
↓
05 · Install and commission
Professional partner support
Products, documentation and other heat pumps
Access technical information and suitable products directly for project planning.
H-PACK for your next project?
Planning a retrofit or looking for a heat-pump solution without a conventional outdoor unit? We can help with product selection, accessories and configuration planning.